Chemya Chlorine dioxide

Features

Extra long shelf life (just activate before use).

Sustained effectiveness against bacteria, fungi, viruses, algae, Legionella, biofilm, etc. microorganisms Approved by the German Drinking Water Directive TrinkwV 2001 as a disinfection method

Free from free chlorine

Disinfects 25 times stronger than hydrogen peroxide

It has 10 times higher disinfection power than chlorine
It has no adverse effects on food products
Effective over a wide pH range

Areas of application
Drinking water systems
Water tanks
Boat or transport water tanks
Jacuzzi and swimming pools
Water pipes and channels
Drinking water networks, etc.

Instructions for use
It is prepared immediately before use.
The powder component is added to the liquid component. After 2-4 hours of reaction (3-6 hours at room temperature), the disinfectant solution is ready for use. Depending on the application area, there is an appropriate size and dosage level.
Certificates In documents such as the German Drinking Water Directive TrinkwV 2001 (chapter 11, 1c) and DIN EN12671, Chlorine dioxide is indicated as suitable for the preparation of water for human consumption. In addition, DVGW (German Water and Gas Association) W291 states that it can be used in the disinfection of drinking water systems and reservoirs. It also meets TRSK 501 requirements. In the license number 2010/259 of the Ministry of Health of the Republic of Turkey, the product (drinking water disinfectant) was determined by the analysis method "It is not possible to measure free chlorine during production and use (in a very small proportion)".

According to the German Drinking Water Guidelines (TrinkWV 2011), 1 liter of ready-made solution is added to 15,000 liters of water (250ml of solution - 3,750 L of water). The maximum solution concentration remaining in drinking water after shock therapy should be 0.2 ml/L.
Available pack sizes: 250ml, 5kg, 10kg, 30kg, 60kg, 200kg