CPA6-LD

The CPA6-LD is the fifth generation CPA brine RO membrane and has the best rejection of all its predecessors at 99.8%. This 400 sq. ft membrane operates at a higher feed pressure than the CPA5-LD, but has the highest rejection in the CPA family.

CPA6-LD membranes are engineered with Low Differential Pressure LDTM Technology designed to minimize colloid fouling. They have a membrane area of 37.0 m2 (400 ft2). Using CPA6-LD results in cost savings while still achieving high rejection from the membranes.

The CPA6-MAX has the same high rejection membrane as the CPA6-LD, but with a 10% increase in membrane area at 440 sq.ft.

CPA6 MAX is the preferred choice for feed waters with low turbidity and silt density index, such as saline well waters.

CPA6-LD and CPA6-MAX membranes are only available in 8.0 inch diameter.

Certain Performance
Permeate flow: 7,300 gpd (27.6 m3/d)
Salt rejection: 99.80% (minimum 99.6%)

Test conditions: 1500 ppm NaCl solution
                                   225 psig (1.55 MPa) Applied Pressure
                                   77F (25 C ) Operating Temperature
                                   15% Permeate Recovery
                                   6.5 - 7.0 pH Range